Dahua NVR Error Code 380000: Troubleshooting Guide

Dahua NVR error code 380000 is a common error that can occur when trying to access the device. This error can be caused by a number of factors, including incorrect IP address, incorrect username or password, or a problem with the device itself.

In most cases, this error can be resolved by simply restarting the Dahua NVR.

What is Dahua NVR error code 380000?

If you’ve ever seen the error code 380000 on your Dahua NVR, don’t panic! This is a relatively common error that can occur for a number of reasons. The most common reason for error code 380000 is that the NVR is unable to connect to the network.

This can be caused by a number of things, such as a bad Ethernet cable, incorrect network settings, or a problem with the NVR itself. If you’re seeing this error, the first thing you should do is check your network connection.

Make sure that the Ethernet cable is plugged in securely and that the network settings are correct. If you’re still seeing the error, there may be a problem with the NVR itself.

In this case, you’ll need to contact Dahua customer support for further assistance. Error code 380000 is a relatively common error on Dahua NVRs, but it’s usually not cause for alarm.

If you’re seeing this error, just check your network connection and make sure everything is plugged in and set up correctly. If the problem persists, contact Dahua customer support for help.

See also  Dahua NVR Troubleshooting: How to Fix Connection Issues

Causes of Dahua NVR error code 380000

If you’re troubleshooting your Dahua NVR and you see the error code 380000, it means the device is having difficulty connecting to the network. There are a few possible causes for this:

1. The NVR is not properly connected to the network. Check the cables and make sure everything is plugged in correctly.

2. The network itself is having problems. This could be due to a number of factors, such as a bad router, bad internet connection, or even just too much traffic on the network.

3. The NVR’s IP address may be incorrect. Check the settings and make sure the IP address is correct.

4. The NVR may be set to a different subnet than the network it’s trying to connect to. This can be changed in the settings.

5. If you’re using a wireless connection, the signal may be too weak. Try moving the NVR closer to the router or using a stronger antenna.

If you’re still having trouble, contact Dahua customer support for assistance.

How to fix Dahua NVR error code 380000

If you’re getting the Dahua NVR error code 380000, it means that the device is having trouble connecting to the network. There are a few things you can do to fix this:

1. Check that the NVR is connected to the network.

2. Check that the NVR is configured to use the correct IP address, gateway, and DNS settings.

3. Check that the NVR’s firmware is up to date.

4. If the NVR is behind a firewall, make sure that the proper ports are open.

See also  Dahua NVR remote viewing not working

5. Try resetting the NVR to its factory default settings.

If you’re still having trouble, contact Dahua customer support for help.

Tips to avoid Dahua NVR error code 380000

If you’re getting the Dahua NVR error code 380000, it means that your device is not connected to the network. This can be caused by a number of things, including a bad network cable, incorrect network settings, or a problem with your router.

Here are some tips to fix the Dahua NVR error code 380000:

– Check the network cable connecting the Dahua NVR to the router. Make sure it’s securely plugged in at both ends and that there are no loose wires.

– Check the network settings on the Dahua NVR. Make sure the IP address, gateway, and DNS settings are all correct.

– Restart the Dahua NVR and router. This can often fix network problems.

– Check for firmware updates for the Dahua NVR and router.

Outdated firmware can cause connectivity problems.