Step-by-Step Guide: How to easily change wifi on your Eufy Robovac in minutes

Are you searching for a simple guide to change the WiFi on your Eufy Robovac? Look no further! We’ve got you covered. Eufy Robovacs are one of the most popular robotic vacuum cleaners on the market. They’re designed to clean your home with minimal effort from you, but sometimes you’ll need to change the WiFi settings on your device.

In this quick guide, we’ll show you how to change the WiFi on your Eufy Robovac in just a few simple steps. By following our easy instructions, you’ll be connected to your home network in no time. So, let’s get started!

Connect to New WiFi Network

If you want to connect your eufy RoboVac to a new WiFi network, the process is fairly straightforward. First, make sure your RoboVac is in range of the new WiFi network. Then, press and hold the AUTO button on your RoboVac until the indicator light flashes.

This will put your RoboVac in pairing mode. Next, go to your device’s WiFi settings and find the new network. Select it and enter the password, then wait for your device to connect.

Once it’s connected, open the eufyHome app on your phone, and select your RoboVac. Tap on settings, and then tap on “WiFi Settings.” Select the new WiFi network and enter the password.

Your RoboVac should now be connected to the new WiFi network, allowing you to control it from your phone and making sure it receives any updates it might need. Don’t forget that when you’re done, you’ll need to put your RoboVac back into normal mode by pressing the AUTO button again.

Step 1: Reset Robovac WiFi Settings

If you’re having trouble connecting your Robovac to a new WiFi network, the first step is to reset its WiFi settings. This will allow the device to forget the previous network and establish a new connection. To do this, simply press and hold the WiFi button on your Robovac until the light blinks rapidly.

This indicates that the WiFi settings have been reset. Next, you’ll need to connect your smartphone or tablet to the new network and follow the on-screen instructions to add your Robovac to the network. Once connected, you can use the manufacturer’s app to control your Robovac and keep your floors clean without lifting a finger.

By following these simple steps, you’ll have your Robovac connected to your new WiFi network in no time.

how to change wifi on eufy robovac

Step 2: Connect to the Eufy Home App

To access the Eufy Home App, you must first connect your device to a WiFi network. This may be a different network than the one you were connected to during the device setup process. To switch networks, open the Eufy Home App and navigate to the device settings.

From there, tap the “WiFi Settings” option and select your new network from the available options. Once connected, your device will be accessible through the Eufy Home App. The process should only take a few minutes, and you’ll be up and running in no time! Remember, staying connected to a strong WiFi signal will ensure the best performance from your device, so make sure your device is located within a reasonable distance from your router.

Step 3: Tap on Robovac Settings

If you need to connect your Robovac to a new WiFi network, the process is straightforward. The first step is to open the Robovac app and choose the device you want to connect. Once you have done that, tap on the “Robovac Settings” option.

On the next screen, you will see an option for “WiFi Settings.” Tap on that, and you will be prompted to choose a new WiFi network to connect to. It’s important to remember that you will need to manually enter the password for the new network, so make sure you have that information on hand before you begin.

Once you have entered the new network information and hit “connect,” your Robovac should successfully connect to the new network. This process is essential if you have recently changed your WiFi network and want to make sure that your Robovac can still connect and function correctly. Keep in mind that this process may vary slightly depending on the specific model of your Robovac, so be sure to check the user manual or online support resources for more detailed instructions.

Step 4: Tap on ‘Change WiFi’

After selecting the device you want to connect to your new WiFi network, the next step is to actually change the WiFi network. This can easily be done by tapping on the “Change WiFi” option. Once you do this, a list of available WiFi networks will pop up.

Simply select the network you want to connect to and enter the password if required. Keep in mind, if the new network is a public network, you may need to complete an additional authentication process before being able to connect. Once you’ve successfully connected to your new WiFi network, make sure to confirm it’s working properly before continuing.

You may need to refresh the connection or restart the device to fully establish the connection. With this simple and easy-to-follow process, you’ll be able to connect to your new WiFi network in no time!

Troubleshooting Tips

Changing the WiFi on a Eufy Robovac can seem like a daunting task but it is actually quite simple. Begin by placing the Robovac on its charging dock and ensuring that it is connected to the network. It may take a few minutes for the device to connect.

Once it is connected, press and hold the WiFi button on the Robovac for about 3 seconds. This will put the device into pairing mode and a blue light will appear on the top. Next, using the Eufy app, follow the steps to connect the device to a new WiFi network.

This includes selecting the network name, entering the password, and ensuring that the network is compatible with the device. Once the process is complete, the Robovac should be connected to the new network and ready to use. Remember to keep the Robovac as close as possible to the router to ensure a strong signal.

By following these troubleshooting tips, changing the WiFi on a Eufy Robovac becomes a simple and straightforward process.

Tip 1: Check Signal Strength

When it comes to troubleshooting issues with your phone’s signal, one of the first things to check is the signal strength. This can usually be found in your phone’s settings or by looking at the signal bars on your screen. A low signal strength can cause dropped calls, slow data speeds, and overall poor performance.

If you’re in an area with low signal strength, try moving to a different location or going outside. You can also try resetting your network settings or contacting your service provider to see if there are any known outages in the area. Remember, a strong signal is essential for good phone performance, so it’s always worth taking the time to ensure your signal strength is up to par.

Tip 2: Reboot the Robovac and Router

If you’re having trouble with your robovac, the first thing you should try is rebooting both your robot vacuum and your router. This can help resolve any connectivity issues that might be interfering with your device’s performance. Simply turn off the robovac and unplug it from the outlet.

Then, turn off your router and unplug it as well. Wait a few minutes before plugging them back in and turning them on. This should give your robovac a fresh start and help it re-establish a connection with your router.

If this doesn’t solve the issue, there may be other factors at play, but it’s always good to start with a reboot to see if it fixes the problem. By taking this simple troubleshooting step, you may be able to get your robovac up and running again in no time.

Final Thoughts

If you’ve recently changed your WiFi network and need to update the settings on your Eufy RoboVac, don’t worry – it’s a fairly straightforward process. First, make sure the vacuum is turned on and in range of your new WiFi network. Then, open the EufyHome app on your smartphone and select the RoboVac device you want to update.

Tap on “Settings” and then “WiFi settings.” From there, you can tap “Change WiFi” and follow the prompts to enter the new network name and password. Once you’re connected, you’ll be able to control your RoboVac from the app again.

It’s important to note that if you have multiple RoboVac devices, you may need to update the WiFi settings for each one separately. With this easy guide, you’ll be back up and running in no time.


Congratulations, you’ve successfully navigated the tumultuous seas of wifi configuration on your Eufy Robovac! By following these steps, you’ve proven yourself a worthy captain of your smart home fleet. Now sit back, relax, and enjoy the convenience and automation that your Robovac provides, because the only thing you’ll have to worry about now is finding witty and clever ways to entertain your guests with your newfound technological prowess.”


How do I connect my Eufy RoboVac to a new WiFi network?
To connect your Eufy RoboVac to a new WiFi network, first reset the WiFi settings by pressing and holding the WiFi icon on the RoboVac for 3 seconds. Then, follow the instructions in the EufyHome app to connect the RoboVac to the new network.

Why won’t my Eufy RoboVac connect to WiFi?
There are several reasons why your Eufy RoboVac may not be connecting to WiFi, including signal interference, incorrect WiFi password, or firmware issues. Try resetting the WiFi settings and ensuring that the RoboVac is close to the router with a strong signal.

Can I use my Eufy RoboVac without WiFi?
Yes, you can use your Eufy RoboVac without WiFi by manually controlling it with the included remote control. However, you will not be able to access the RoboVac’s smart features and scheduling options without WiFi.

How can I check the WiFi signal strength on my Eufy RoboVac?
To check the WiFi signal strength on your Eufy RoboVac, go to the device settings in the EufyHome app and navigate to the ‘Wi-Fi Signal’ section. This will show you the current signal strength and whether the device is connected to WiFi.