If you’ve recently changed your WiFi network, you may be wondering how to connect your Wyze Cam to the new network. It can be frustrating to have such a useful device be rendered useless because of a simple WiFi change. But don’t get discouraged, as it’s actually quite easy to change your Wyze Cam WiFi settings.
In this blog post, we’ll walk you through the steps to get your Wyze Cam connected to your new network quickly and easily. So, if you’re ready to start feeling secure and connected again, keep reading!
Step 1: Reset Wyze Cam
If you’re wondering how to change Wyze Cam WiFi, it’s important to follow these steps carefully to ensure a smooth transition. Firstly, you’ll want to reset your Wyze Cam by pressing and holding the setup button until the blue light flashes. Once you’ve done this, you can release the button and wait for your Wyze Cam to reboot.
This process may take several minutes, but it’s important not to interrupt it as this can cause issues with your camera’s connectivity in the future. Once your Wyze Cam has fully rebooted, you’re ready to move on to the next step of the process. By resetting your camera, you’re ensuring that any previous connections have been terminated and your camera is ready for a fresh start with a new WiFi network.
So, follow this step and get ready to change your Wyze Cam WiFi in no time!
Press and hold the setup button until the LED turns solid blue.
If you’re having trouble with your Wyze Cam or just want to start fresh, resetting it is an easy process. The first step is to press and hold the setup button until the LED turns solid blue. This may take up to 30 seconds, so be patient.
Once the LED is solid blue, release the setup button and wait for the Wyze Cam to restart. This should take about a minute or so. After it has restarted, you can begin setting up your Wyze Cam again as if it were brand new.
This simple reset can help solve many common issues you may be experiencing with your Wyze Cam, and it only takes a few minutes. So don’t hesitate to give it a try if you’re having any issues with your device.
Release the button and wait for the device to restart.
If you’re having issues with your Wyze Cam, resetting the device might just be the solution you need. Here’s how to reset your Wyze Cam: First, locate the button on the bottom of the camera. Use a paperclip or similar tool to press and hold the button down for around 10 seconds.
You should notice the device’s LED status light blinking yellow and then blue. At this point, you can release the button and wait for the Wyze Cam to restart. This process will reset the device to its default settings, so you’ll need to set it up again once it has restarted.
Don’t let a malfunctioning Wyze Cam ruin your day – reset the device and get back to using it to keep your home safe and secure.
Step 2: Connect to New Wifi
Once you have your Wyze Cam set up and ready to go, you may need to change the wifi network it is connected to from time to time. To do so, the first step is to make sure that the camera is plugged in and powered on. Once the camera is up and running, open your Wyze app and select the camera you want to change the wifi network for, then select “Device Settings”.
From there, select “Wifi Settings” and then select “Change Network”. The app will then prompt you to enter your new wifi network credentials. Once you’ve entered your new wifi network details, the Wyze Cam should automatically connect.
Keep in mind that it may take a few minutes for the device to connect to the new network, so be patient. With just a few taps on your smartphone, you can change your Wyze Cam’s wifi network in no time.
Open the Wyze app and tap on the camera.
To connect your Wyze camera to a new WiFi, the second step is to open the Wyze app on your smartphone or tablet and tap on the camera you want to connect. Once you have selected the camera, you will need to go to the camera settings by clicking on the gear icon in the top right corner. From there, you can select the option to “Change WiFi Network” and follow the prompts to choose your new WiFi network and input the password.
It’s important to note that the camera will need to be in close proximity to your WiFi network during this process. Once you have completed the steps, your Wyze camera should be successfully connected to your new WiFi network and ready to use. With this quick and simple process, you can easily switch your camera’s connection to any new WiFi networks you may have in the future.
Tap on the gear icon and select ‘Device Info’.
Connecting to a new wifi network can be confusing, but luckily it’s a simple process. The first step is to access your device information by tapping on the gear icon in your device’s settings. Once you’ve done that, scroll down until you see the option for ‘Device Info’.
This will bring up your device’s information, including the current wifi network that you’re connected to. The next step is to disconnect from your current wifi network and connect to the new one. This can typically be done by selecting ‘Wifi’ from the settings menu and selecting the new network from the list of available options.
Remember to enter the correct password for the new network if required. With these simple steps, you’ll be connected to your new wifi network in no time.
Select ‘Change Wifi Network’.
So you want to connect to a new WiFi network? No problem! In just a few simple steps, you’ll be back online and surfing the web. The second step in this process is to select “Change WiFi Network” on your device. This will allow you to connect to a new network and should only take a few moments.
Once you’ve selected this option, your device will search for available WiFi networks in the area. Once it finds your new network, you’ll need to input the login credentials, which may include a username and password. After that, you’ll be able to connect to your new network and get back to browsing the internet.
Just remember, if you’re having trouble connecting to your new network, it might be worth checking your device’s WiFi settings or contacting your internet service provider for further assistance. But other than that, you’re all set to enjoy all the benefits of your new WiFi network!
Follow the instructions to connect to the new wifi network.
Connecting to a new wifi network can seem like a daunting task, but it is actually quite simple. Once you have located the new wifi network that you want to connect to, the first step is to click on the wifi icon on your device. Then, select the new network from the list of available networks.
You will be prompted to enter the network password, which is usually found on the router or provided by the network administrator. Once you have entered the password, click on “Connect” and your device should automatically connect to the new wifi network. It’s important to make sure that you have entered the password correctly, as an incorrect password can result in connection issues.
If you are still having trouble connecting to the new network, try restarting your device or contacting the network administrator for assistance. With these simple steps, you can easily connect to a new wifi network and stay connected wherever you go.
Step 3: Reconnect and Test
Now that you’ve successfully changed the Wi-Fi network on your Wyze Cam, it’s time to reconnect and test it to ensure everything is working correctly. First, plug in the camera and wait for it to boot up. Then, go to the Wyze app on your phone and select the camera you just updated.
Follow the prompts to reconnect it to the new Wi-Fi network. This step may involve entering the new Wi-Fi network password and waiting for the camera to connect. Once the camera has been reconnected to the new Wi-Fi network, it’s time to test it.
Check the live stream to make sure the camera is receiving and transmitting data correctly. Make sure the camera responds to voice commands, motion detection, and any other features you use. If there are any issues, try resetting the camera and repeating the steps.
Congratulations, you’ve successfully changed the Wi-Fi network on your Wyze Cam!
Wait for the camera to reconnect to the new wifi network.
Now that you’ve entered your network information into the camera and it has rebooted, it’s time to reconnect and test the connection. Wait for the camera to reconnect to the new wifi network. This may take a few minutes, so be patient.
Once it’s connected, test the connection by viewing the camera’s live feed on your phone or computer. Make sure the feed is clear and stable. If it’s not, try adjusting the camera’s position or moving it closer to your wifi router.
Don’t forget to consider the placement of the camera’s antenna as well. If you’re having trouble getting a solid connection, you may need to invest in a wifi extender. Once you’re satisfied with the connection, congratulations! You’ve successfully connected your camera to your new wifi network.
Test the camera to ensure it’s working properly on the new network.
After setting up your camera on a new network, it’s crucial to reconnect and test it to ensure that everything is working correctly. Start by logging in to the camera’s settings and checking its connection status. If it shows “online,” you’re good to go.
If not, check your network settings and make sure the camera is properly connected to the new Wi-Fi network. Once you’ve verified the camera’s connection, run a test recording to ensure that the camera is functioning properly on the new network. Check the footage to ensure that the video quality is adequate, and that there are no issues with sound or delay.
If everything looks good, you can be confident that the camera is set up correctly and ready to go. Don’t forget to check in periodically to ensure that your camera continues to function correctly on your network.
Conclusion
Changing the WiFi on your Wyze Cam is as simple as giving your favorite coffee shop your new address. Whether you’re moving across town or just upgrading your internet, following these steps will ensure you’re back to watching your favorite kitty videos in no time. So go ahead, change that WiFi, and keep your Wyze Cam connected wherever life takes you.
“
FAQs
How do I change the WiFi network on my Wyze Cam?
To change the WiFi network on your Wyze Cam, follow these steps:
1. Open the Wyze app and select the camera you want to change.
2. Tap on the Settings gear icon.
3. Choose ‘Device Info’.
4. Select ‘WiFi Settings’.
5. Choose ‘Manual Setup’.
6. Select the new WiFi network and enter the password.
7. Wait for the camera to connect to the new network.
What do I do if my Wyze Cam won’t connect to WiFi?
If your Wyze Cam won’t connect to WiFi, try these troubleshooting steps:
1. Make sure the camera is close enough to the router and within range.
2. Ensure you have entered the correct WiFi network name and password.
3. Check that your router is using WPA/WPA2 security.
4. Restart your router and the Wyze Cam.
5. Reset the Wyze Cam to its default settings and try again.
Why is my Wyze Cam losing WiFi connection?
Wyze Cam may lose WiFi connection due to various reasons, including:
1. Poor/Weak network signal.
2. WiFi interference from neighboring devices.
3. A distance issue between the camera and router.
4. Network congestion or overburdening.
To fix the issue, try relocating the camera closer to the router or switch to a less congested WiFi channel.
Can I use my Wyze Cam without WiFi connection?
No, a WiFi connection is necessary to use Wyze Cam. It requires an internet connection to stream live video, record events, and interact with the app. However, if the WiFi is down, the Wyze Cam can still record videos to the SD card, but you won’t have access to the live streaming or any features that require WiFi.
