How to Factory Reset Swann DVR without Password

When dealing with a Swann DVR, you might find yourself in a situation where you need to factory reset it without the password. This guide will show you how to do just that. Factory resetting a Swann DVR is essential if there are problems with the device or if you want to start from scratch and configure it the way you want. Follow these steps, and you should be good to go.

What is Swann’s DVR?

Swann DVR is a network video recorder that can record and store live or pre-recorded videos. The device can be reset by factory setting without requiring a password.

How to Factory Reset Swann DVR without Password

Swann DVR provides a way to factory reset the device without needing to enter the password. To factory reset Swann DVR: Press and hold down the power button for at least 8 seconds until the device powers off. After the device powers off, press and hold down the reset button for at least 10 seconds. the device will then restart, and you will be able to access the main menu. From here, navigate to “Settings” and select “Factory Reset.” Select “Yes” to confirm, and your Swann DVR will be reset.

How to Restore Files from a Swann DVR Without Password

If you have forgotten the password to your Swann DVR, there is a way to restore files without needing to reset them. To do this, you must connect the device to your computer and open the file manager. Once you have opened the file manager, navigate to your computer’s “My Swann DVR” folder. Inside this folder, you will find a file called “restore_file.” This file contains a list of all of the files on your DVR and their corresponding locations on your computer. To restore a file, drag and drop the file into the location that it corresponds to on your computer.

How to Reset Swann DVR for the First Time

If your Swann DVR is not working as it should, you may need to reset it. This will erase all of the content on the unit and restore it to its factory defaults.

To reset your Swann DVR:

1. Connect the power cable to the DVR and plug it into an outlet.

2. Press and hold the POWER button for at least 5 seconds until you see the red light turn off, then release the POWER button.

3. While holding the RECORD button, connect an HDMI cable from your compatible TV to one of the connectors on the back of your DVR.

4. Once connected, press and hold down both buttons on your TV remote until you see a blue screen with a message. which indicating that your DVR has been detected (see fig 4).

Fig 4: The blue screen with a message indicating that your DVR has been detected will appear once your TV is connected to your Swann DVR. and the RECORD button is held down while the HDMI cable is connected

Conclusion

If your Swann DVR is having trouble logging in or you want to restore the factory settings, this guide will show you how to do it without a password. Follow the instructions, and you should have no problems. If, for some reason, you need to reset your password, be sure to visit our article on how to set up a new password for your Swann DVR.