How to Find Reolink Camera Ip Address

How to Find Reolink Camera Ip Address

by

Finding your Reolink camera IP address is essential for remote viewing, configuration, and troubleshooting. Whether you use a web browser, Reolink app, or your router’s admin page, this guide walks you through every method clearly and simply. With just a few clicks, you’ll gain full control over your security camera system.

Quick Answers to Common Questions

Tip/Question?

Answer: Can I find my Reolink camera’s IP without logging into my router? Yes! Use the Reolink app or Reolink Client software, both of which display device IP addresses directly without needing router access.

Tip/Question?

Answer: Why does my camera’s IP keep changing? This usually happens because your router assigns dynamic IPs via DHCP. To fix it, set a static IP either in your router or directly in the camera settings.

Tip/Question?

Answer: Is it safe to share my camera’s IP address online? No—sharing your IP can expose your camera to hackers. Only share it with trusted individuals, and avoid posting it publicly.

Tip/Question?

Answer: Do all Reolink cameras have the same default IP? No, but many use common defaults like 192.168.1.108 or 192.168.0.108. Always verify by checking your network after setup.

Tip/Question?

Answer: Can I use my camera’s IP to access it from outside my home network? Only if you set up port forwarding and dynamic DNS (DDNS), which adds complexity. The Reolink app handles remote access more securely without exposing your IP.

How to Find Reolink Camera IP Address: A Complete Step-by-Step Guide

If you own a Reolink security camera, you’ve likely encountered a moment when you need to access your camera remotely, update its firmware, or troubleshoot connectivity issues. To do any of these tasks, you must first know your camera’s IP address. But how do you find it? Don’t worry—this comprehensive guide will walk you through every reliable method to locate your Reolink camera’s IP address quickly and safely.

Whether you’re using Windows, macOS, Android, or iOS, whether your camera is wired or wireless, and whether you prefer using apps or command-line tools, we’ve got you covered. By the end of this article, you’ll not only know how to find your camera’s IP but also understand why it matters and how to keep it secure.

Why You Need Your Reolink Camera’s IP Address

Every device connected to a home network has an IP address—a numerical label that identifies it within that network. Think of it like a street address for your devices. When you want to access your Reolink camera from a computer or another device, the system needs to know where to send the request. That’s where the IP address comes in.

How to Find Reolink Camera Ip Address

Visual guide about How to Find Reolink Camera Ip Address

Image source: home-cdn.reolink.us

Knowing your camera’s IP address allows you to:

  • Log in directly through a web browser to access live video or adjust settings.
  • Configure port forwarding for remote viewing outside your home network.
  • Update the camera’s firmware or change advanced settings.
  • Troubleshoot connection problems with customer support.

In short, your Reolink camera’s IP address is your gateway to full control and functionality. Let’s dive into the best ways to find it.

Method 1: Use Your Router’s Admin Panel

The most straightforward way to find your Reolink camera’s IP address is by checking your router’s list of connected devices. Every router keeps a log of all devices that have accessed its Wi-Fi or Ethernet ports. Here’s how to find yours:

Step 1: Access Your Router’s Web Interface

Open a web browser (Chrome, Firefox, Edge, etc.) and type your router’s default gateway IP into the address bar. Common router IPs include:

  • 192.168.1.1
  • 192.168.0.1
  • 192.168.2.1

If these don’t work, press Windows + R, type cmd, and hit Enter. Then type ipconfig and look for the “Default Gateway” under your active network adapter. That’s your router’s IP.

Step 2: Log In to Your Router

Enter your router’s username and password. If you haven’t changed them, check the label on the router or consult your ISP. Once logged in, navigate to the “Connected Devices,” “Device List,” or “DHCP Clients” section (the exact name varies by brand).

Step 3: Locate Your Reolink Camera

Scroll through the list of devices. Look for entries labeled “Reolink,” “RCH-xxxx,” “RLC-xxxx,” or similar. The corresponding IP address next to it is your camera’s current network address.

Pro Tip: Some routers allow you to sort devices by manufacturer. If yours does, select “Reolink” to filter the list instantly.

Method 2: Use the Reolink App

If you’ve already set up your Reolink camera using the official app, finding its IP is even easier. The app often displays network details for each device.

Step 1: Open the Reolink App

Launch the Reolink app on your smartphone or tablet (iOS or Android). Make sure you’re connected to the same network as your camera.

Step 2: Go to Device List

Tap the “Device List” or “My Devices” tab at the bottom of the screen.

Step 3: Tap Your Camera

Select the camera you want to inspect. In the device details screen, look for “Network” or “Device Info.” You’ll see the IP address listed there.

Note: If you don’t see the IP address, try tapping “Advanced Settings” or “More Options” (often three dots). Some versions of the app require you to enable “Show Advanced Settings” in the app preferences.

Method 3: Use the Reolink Client Software

For users who prefer desktop applications, Reolink offers a free software called Reolink Client. It can automatically scan your network and detect all connected Reolink cameras.

Step 1: Download and Install Reolink Client

Visit reolink.com/reolink-client and download the version for your operating system (Windows or macOS).

Step 2: Launch the Program

Open Reolink Client. It will automatically begin scanning your local network.

Step 3: View Detected Cameras

Once scanning completes, your camera(s) will appear in the device list. Right-click on the camera and select “Properties” or “Device Info.” The IP address will be displayed there.

This method is especially useful if your camera uses a dynamic IP and you’re unsure what it currently is.

Method 4: Check the Camera’s Web Interface Directly

If you suspect your camera might have a static IP or you just want to verify its address, you can try accessing its built-in web interface directly.

Step 1: Use a Default IP Guess

Many Reolink cameras use common default IP addresses such as:

  • 192.168.1.108
  • 192.168.0.108

Type one of these into your browser’s address bar and press Enter.

Step 2: Log In to the Camera

Enter the default username and password (usually admin/admin or check the camera’s manual). If successful, you’ll see the camera’s settings page—confirm the IP shown matches the one you guessed.

Step 3: Verify Network Settings

In the camera’s settings, go to “Network” > “Basic Settings.” The “IP Address” field confirms the current address. If it doesn’t match your guess, note the correct value for future reference.

Caution: Avoid changing the IP unless necessary. Incorrect settings can disconnect you from the camera.

Method 5: Use Command Line Tools (Advanced Users)

Tech-savvy users can use built-in networking tools to discover devices on their network. These methods are powerful but require familiarity with terminal commands.

On Windows: Use Command Prompt or PowerShell

  1. Press Windows + R, type cmd, and press Enter.
  2. Type arp -a and press Enter.
  3. Look through the list of MAC addresses and IPs. Reolink cameras typically have MAC addresses starting with 00:0E:0C or B8:27:EB.
  4. Cross-reference the MAC prefix with known Reolink models to identify the correct IP.

On macOS or Linux: Use Terminal

  1. Open Terminal.
  2. Type arp -a and press Enter.
  3. Again, look for MAC addresses beginning with Reolink’s OUI (Organizationally Unique Identifier).

This method works best when combined with a network scanner like Advanced IP Scanner or Angry IP Scanner, which can map devices more clearly.

Troubleshooting: What If You Can’t Find the IP?

Sometimes, despite trying multiple methods, your Reolink camera’s IP address remains elusive. Here are some common issues and solutions:

Issue: Camera Not Showing Up in Router List

Solution: Ensure the camera is powered on and connected to the same network as your computer or phone. Try restarting both the camera and your router. Wait 30 seconds after reboot before checking again.

Issue: Multiple Devices Have Similar Names

Solution: Use the MAC address instead of the hostname. Most routers display it alongside the IP. Compare the MAC prefix with Reolink’s registered identifiers.

Issue: Dynamic IP Changed After Reboot

Solution: Assign a static IP to your camera in your router’s DHCP reservation list or configure it directly in the camera’s network settings. This ensures the IP never changes.

Issue: Firewall or Antivirus Blocking Access

Solution: Temporarily disable firewall software to test connectivity. If access works afterward, adjust your security settings to allow Reolink traffic.

Bonus: How to Set a Static IP for Your Reolink Camera

To avoid future confusion, consider assigning a static IP to your camera. This prevents the address from changing due to DHCP lease renewals.

Option 1: Through Your Router

  1. Find your camera’s MAC address (via router or camera label).
  2. In your router’s admin panel, go to “DHCP Reservations” or “Static DHCP.”
  3. Add a new entry: enter the MAC address and assign a preferred IP (e.g., 192.168.1.108).
  4. Save and reboot the router.

Option 2: Through the Camera’s Web Interface

  1. Access the camera via its current IP.
  2. Go to “Network” > “Basic Settings.”
  3. Change “Obtain IP Automatically” to “Manual.”
  4. Enter your desired IP, subnet mask, gateway, and DNS.
  5. Save and reconnect.

A static IP makes remote access and troubleshooting much simpler.

Security Considerations

Once you’ve found your camera’s IP address, it’s important to protect it from unauthorized access. Reolink cameras are powerful tools, and leaving them unsecured can lead to privacy breaches.

Follow these best practices:

  • Change default passwords: Never leave the login as “admin/admin.” Create a strong, unique password.
  • Update firmware regularly: Security patches are released frequently—check for updates in the app or web interface.
  • Enable HTTPS and encryption: If supported, turn on encrypted connections for remote viewing.
  • Limit remote access: Only forward ports to the camera if absolutely necessary, and use strong authentication.

Conclusion

Finding your Reolink camera’s IP address doesn’t have to be complicated. Whether you use your router’s admin page, the Reolink app, desktop software, or command-line tools, each method gives you reliable access to critical network information. By understanding how to locate and manage your camera’s IP, you unlock full control over your surveillance system—enabling seamless monitoring, maintenance, and customization.

Remember to assign a static IP once you’ve located your camera to prevent future headaches. And always prioritize security by updating passwords and firmware. With this guide, you’re equipped to handle any Reolink-related networking challenge confidently and efficiently.