Finding the IP address of your Akaso camera is essential for remote access, troubleshooting, or configuring network settings. This guide walks you through multiple methods—using the Akaso app, connecting via Wi-Fi, checking the router, and more—to help you locate your camera’s IP address efficiently. Whether you’re setting up a new device or resolving connectivity issues, these simple steps ensure you get accurate information fast.
Finding the IP address of your Akaso camera might seem tricky at first, but with the right approach, it’s actually quite straightforward. Whether you’re trying to view your camera remotely, adjust network settings, or troubleshoot connection problems, knowing how to locate the IP address is a fundamental skill every user should master. This comprehensive guide walks you through every method available—from using the official app to diving into your router’s settings—so you can confidently manage your Akaso camera no matter what model you have.
Akaso offers a range of action cameras and dash cams, many of which support Wi-Fi connectivity and mobile apps for easy control and live viewing. However, unlike smartphones or laptops, these cameras don’t broadcast their IP address directly. Instead, they receive one dynamically from your router (via DHCP) or may use a static IP set during initial setup. That’s why having reliable ways to find that IP address becomes crucial—especially when you need to access advanced features or resolve technical hiccups.
In this article, we’ll cover everything you need to know about finding the IP address to an Akaso camera. We’ll explain each method in plain language, provide visual cues where helpful, and include practical tips to avoid common pitfalls. By the end, you’ll be able to locate your camera’s IP address quickly and accurately—no tech degree required!
Quick Answers to Common Questions
Can I view my Akaso camera without the app?
Yes, if you find its IP address, you can access the web interface via a browser using default login credentials. Some third-party apps also support ONVIF-compatible models.
Is the IP address permanent?
No—most Akaso cameras use dynamic IPs assigned by your router. To make it consistent, configure a static IP reservation in your router’s settings.
Why does my camera show a different name in the router?
Router device names often reflect MAC addresses or random strings. Cross-reference with your camera’s physical label or use scanning tools to match activity timing.
What if I lose the default password?
Perform a factory reset. This restores default credentials (admin/123456) and allows fresh setup.
Do all Akaso models support Wi-Fi and IP access?
Not all. Budget models or older releases may lack Wi-Fi entirely. Check your specific model’s specs before assuming remote access is possible.
Understanding Why You Need the IP Address
Before jumping into the steps, it helps to understand *why* you’d want the IP address in the first place. Think of the IP address as your camera’s digital home address on your local network. Just like how mail needs a street address, internet-connected devices need an IP address to communicate with other gadgets—like your smartphone, laptop, or even cloud servers.
For Akaso cameras, you typically need the IP address when:
– You’re setting up remote viewing via the Akaso app.
– You want to access the camera’s built-in web interface for configuration.
– Your camera appears offline, and you suspect a network issue.
– You’re trying to assign a static IP to avoid future disconnections.
– You’ve forgotten the password and need to log in via a browser.
Knowing the IP also lets you use third-party surveillance software if the official app doesn’t meet your needs. But remember: Akaso cameras are designed primarily for consumer use, so not all models offer full ONVIF compliance or public cloud streaming. Still, finding the IP opens doors to deeper customization and troubleshooting.
Method 1: Use the Akaso App (Easiest Method)
The quickest way to find your Akaso camera’s IP address is through the official Akaso Vision app. This free app is available for both Android and iOS and is optimized to work seamlessly with most Akaso models, including V50X, EK7000, Brave series, and others released after 2018.
Step-by-Step Instructions
- Download and Install the App: Go to Google Play Store (Android) or Apple App Store (iOS), search for “Akaso Vision,” and install the official app.
- Power On Your Camera: Turn on your Akaso camera and ensure it’s in Wi-Fi mode. Some models require you to press and hold the power button until the LED blinks blue.
- Connect to Camera’s Wi-Fi: On your phone, go to Wi-Fi settings and select the network named something like “AKASO_XXXX” (replace XXXX with numbers/letters). No password is usually needed—just connect.
- Open the Akaso Vision App: Launch the app. It should automatically detect your camera within 1–2 minutes. If prompted, allow location permissions (required for Bluetooth/Wi-Fi scanning).
- View Device Info: Once connected, tap on your camera’s name in the app list. In the device details screen, look for fields labeled “IP Address,” “Local IP,” or “Network.” This is your camera’s current IP address.
💡 Pro Tip: Keep your camera charged during this process—low battery can slow down detection.
If the app shows the IP address, you’re golden! You can now use that number to access the camera’s web interface (more on that later). If it doesn’t appear, try moving closer to the camera or restarting both devices.
Method 2: Connect via Direct Wi-Fi to Access Web Interface
Many users prefer accessing their Akaso camera through a web browser because it gives more control over settings like resolution, motion detection, and recording schedules. To do this, you’ll need to temporarily connect your computer or phone to the camera’s own hotspot.
What You’ll Need
– A smartphone, tablet, or laptop with Wi-Fi capability
– An Ethernet cable (optional, for wired setups)
– Basic knowledge of entering IP addresses in browsers
Step-by-Step Process
- Enable Camera Hotspot: Power on your Akaso camera and switch it to Wi-Fi mode. Wait about 30 seconds—you’ll hear a beep or see the LED blink green.
- Join the Camera’s Network: On your device, go to Wi-Fi settings and select the SSID starting with “AKASO_” (e.g., AKASO_1A2B3C). Do not enter any password unless specified in the manual.
- Open Browser and Type Default Gateway: Launch Chrome, Safari, Firefox, etc., and type
http://192.168.1.1orhttp://192.168.0.1into the address bar. These are common default gateways for embedded systems. - Enter Login Credentials: Use the default username (usually admin) and password (often 123456, admin123, or blank). Check your camera’s manual if unsure.
- Locate IP Settings: Once logged in, navigate to Settings > Network > LAN. Here, you’ll see the assigned IP address, subnet mask, and gateway.
⚠️ Important Note: After accessing the web interface, disconnect from the camera’s Wi-Fi and reconnect to your home network. Otherwise, your device won’t access the internet.
This method works best with newer Akaso models (2019 onward). Older versions may lack full web UI support. Also, some regional variants have slightly different defaults—always double-check local documentation.
Method 3: Check Your Home Router’s Connected Devices List
Your router acts as the traffic cop for your entire home network. Every device—your TV, phone, smart speaker, and camera—gets listed here when connected. Finding your Akaso camera among dozens of entries might sound daunting, but it’s often faster than hunting through menus.
How to Access Your Router
Most home routers use one of these default IP addresses to reach their admin panel:
– 192.168.0.1
– 192.168.1.1
– 192.168.2.1
To log in:
1. Plug in your computer or connect to your home Wi-Fi.
2. Open a browser and type one of the above addresses into the URL field.
3. Enter your router’s login credentials (often found on a sticker at the bottom of the router; defaults vary by brand).
Once inside, look for sections like Connected Devices, Device List, or DHCP Clients. Sort by name or MAC address if possible. Akaso cameras usually appear under names like:
– “Akaso Camera”
– “ActionCam”
– Or a random alphanumeric string (e.g., “CAM_0A1B2C”)
Click on the entry and note the associated IP address. Write it down somewhere safe!
🔍 Tip: Enable “Show Hostname” in your router settings if available—it makes identifying devices easier.
If your camera uses a dynamic IP (most do), it could change occasionally. Consider setting a static reservation in your router to prevent surprises.
Method 4: Use Network Scanning Software
When your camera isn’t showing up in the app or router, or you just want to double-check, network scanning tools can be lifesavers. These apps probe your local network for active devices and reveal their IPs, hostnames, and sometimes even open ports.
Recommended Tools
– Fing (iOS/Android): Free version works well; paid upgrade adds alerts.
– Angry IP Scanner (Windows/macOS/Linux): Open-source and lightweight.
– Nmap (Advanced users): Command-line tool with powerful options.
Using Fing (Simple Example)
1. Download Fing from your device’s app store.
2. Open the app and tap Start Scan.
3. Wait 1–2 minutes for results.
4. Look for entries matching Akaso naming patterns or filter by manufacturer (if supported).
5. Tap the suspected camera entry to reveal its IP address.
These tools scan your entire subnet (e.g., 192.168.1.x), so they may return dozens of results. Focus on devices with recent activity timestamps or those appearing only when your camera is powered on.
Method 5: Factory Reset as Last Resort
If all else fails—and especially if you’ve forgotten login credentials—performing a factory reset restores default settings, including the ability to reconnect via the original setup flow. This erases custom configurations, so back up settings first if possible.
How to Reset Your Akaso Camera
1. Power off the camera completely.
2. Press and hold the Power + Mode buttons simultaneously for 10–15 seconds until you hear two beeps or see the LED flash red.
3. Release and power the device back on.
4. Reconnect to the camera’s Wi-Fi (AKASO_XXXX) and open the Akaso Vision app.
5. Follow the setup wizard—it will assign a fresh IP address during registration.
After reset, the camera behaves like new: default username/password apply, and the app will guide you through initial network pairing.
Troubleshooting Common Issues
Even with perfect instructions, things don’t always go smoothly. Here’s how to handle typical snags:
Issue: App Can’t Find My Camera
– Ensure you’re connected to the camera’s hotspot (not your home Wi-Fi).
– Disable VPNs or ad blockers on your phone.
– Try restarting both camera and phone.
– Update the Akaso Vision app to the latest version.
Issue: IP Address Changes Frequently
This is normal with DHCP-assigned addresses. To fix:
– In your router, reserve an IP based on the camera’s MAC address.
– Or manually set a static IP in the camera’s web interface (requires prior IP knowledge).
Issue: Can’t Log Into Web Interface
– Confirm you’re using the correct default credentials.
– Try alternative passwords like “admin,” “password,” or leave blank.
– Clear browser cache/cookies or try incognito mode.
– Ensure you typed the full IP correctly (e.g., http://192.168.1.100, not just 192.168.1.100).
Issue: Camera Shows Up in Router But Not App
– The app may only support direct hotspot connections, not router-linked ones.
– Temporarily bridge your phone to the camera’s Wi-Fi again.
Final Tips for Smooth Operation
– Always keep your Akaso firmware updated via the app—newer versions improve stability and security.
– Label your camera in your router’s device list for easy identification.
– Avoid placing the camera near strong Wi-Fi sources (microwaves, cordless phones) that cause interference.
– If using multiple cameras, rename them in-app or via web UI to avoid confusion.