Lorex NVR Factory Reset Without Password: A Complete Guide

by

Are you struggling with your Lorex NVR and want to reset it, but don’t have the password? No worries, we’ve got you covered. In this article, we will guide you on how to perform a Lorex NVR factory reset without a password. This step-by-step guide is perfect for anyone who needs to reset their Lorex NVR without the hassle of entering a password.

Lorex NVRs are popular for their high-quality video surveillance and advanced features. However, it’s not uncommon for users to forget their passwords or lose access to their accounts. In such cases, resetting the NVR becomes necessary. In this article, we will show you how to reset your Lorex NVR without a password.

Why Resetting Your Lorex NVR Without Password is Important?

Resetting your Lorex NVR without a password is important in case you have forgotten your password, or your NVR has been hacked. It’s also necessary when you want to sell or give away your NVR to someone else. In all these cases, resetting your NVR without a password is essential.

Ways to Reset a Lorex NVR Without Password

There are different ways to reset your Lorex NVR without a password. Here are some of the most common methods:

Method 1: Using the Reset Button

The easiest and most common way to reset your Lorex NVR is by using the reset button. Here’s how:

  1. Locate the reset button at the back of your NVR.
  2. Press and hold the reset button for about 10 seconds.
  3. Release the reset button once the NVR restarts.
  4. Your NVR will be reset to the factory settings.

Method 2: Using the Lorex NVR Local Interface

Another way to reset your Lorex NVR without a password is by using the local interface. Here’s how:

  1. Connect your NVR to a monitor using an HDMI or VGA cable.
  2. Log in to your NVR using the default username and password (admin/admin).
  3. Go to Main Menu > Maintenance > Default Setting.
  4. Click on “Default Setting” and then click on “OK”.
  5. Wait for the NVR to restart.
  6. Your NVR will be reset to the factory settings.

Method 3: Using the Lorex Cloud Client

If you have the Lorex Cloud Client installed on your computer, you can use it to reset your NVR without a password. Here’s how:

  1. Open the Lorex Cloud Client on your computer.
  2. Log in to your NVR using your Lorex account.
  3. Click on “Device Management”.
  4. Select your NVR from the list of devices.
  5. Click on “Reset Password” and then click on “OK”.
  6. Wait for the NVR to restart.
  7. Your NVR will be reset to the factory settings.

Method 4: Using the Command Prompt

The last method to reset your Lorex NVR without a password is by using the command prompt. Here’s how:

  1. Connect your NVR to your computer using an Ethernet cable.
  2. Open the Command Prompt on your computer.
  3. Type “ping” followed by the IP address of your NVR.
  4. Press Enter and wait for the ping to finish.
  5. Type “telnet” followed by the IP address of your NVR.
  6. Press Enter and wait for the login prompt.
  7. Type “root” as the username and press Enter.
  8. Type “xc3511” as the password and press Enter.
  9. Type “cd /mnt/mtd” and press Enter.
  10. Type “cd config” and press Enter.
  11. Type “rm passwd” and press Enter.
  12. Type “reboot” and press Enter.
  13. Wait for the NVR to restart.
  14. Your NVR will be reset to the factory settings.

Precautions to Take Before Resetting Your Lorex NVR

Before resetting your Lorex NVR without a password, there are some precautions you should take:

  • Back up all your recordings and settings to avoid losing important data.
  • Disconnect your NVR from the power source to prevent any electrical damage.
  • Follow the instructions carefully to avoid damaging your NVR.

Step-by-Step Guide to Resetting Your Lorex NVR Without Password

Now that you know the different ways to reset your Lorex NVR without a password and the precautions to take, here’s a step-by-step guide to reset your NVR:

  1. Turn off your NVR by disconnecting it from the power source.
  2. Locate the reset button at the back of your NVR.
  3. Press and hold the reset button for about 10 seconds.
  4. Connect your NVR to a monitor using an HDMI or VGA cable.
  5. Log in to your NVR using the default username and password (admin/admin).
  6. Go to Main Menu > Maintenance > Default Setting.
  7. Click on “Default Setting” and then click on “OK”.
  8. Wait for the NVR to restart.
  9. Your NVR will be reset to the factory settings.

How do I lock my Lorex Cloud app with a user code?

For the safety of your Lorex Cloud app, follow these steps to lock it with a user code:

  1. Open your smartphone or tablet, then open the Lorex Cloud app.
  2. You’ll find the settings button at the top left corner of the screen. Give it a tap.
  3. Look through the menu for an option called “Local Config” and tap on it.
  4. Inside this new menu, you should find “User Code.” Tap on that too.
  5. You’ll see a switch, flip it so that your User Code feature is on.
  6. A prompt will show up and ask for a 4-digit password. Come up with one and type it in.
  7. After doing so, you will need to re-enter your code once more to confirm.
  8. Success! Your User Code is now activated and you will have to input it every time you want to access this app.

An extra layer of protection has been added to your Lorex Cloud app thanks to these steps. It can only be accessed by inputting that special 4-digit user code that you made earlier.

How do I reset the passwords for LNC Cameras / L-View Client Software?

Follow these steps to reset your password for LNC Cameras or the L-View Client Software:

  1. Resetting the L-View Client Software Password:
    Uninstall the L-View Client software from your computer, and then reinstall it by downloading the latest version. Make sure you visit the right place to download it.
    Consult instructions specific to your product if needed.
  2. Resetting the LNC Camera Password:
    To factory reset an LNC camera, you’ll need to wipe everything on it. This includes all configurations and WiFi network connections.
    Make sure that it’s on, then locate and find a way to press and hold the reset button for 10 seconds. It’s location depends on which model you have so refer to the user manual.
    Find downloads and documents based on your camera in order to figure out what comes next.
    Now launch the client software after everything has been restored and install any firmware updates when prompted. If not, manually update using the software.
    After restarting, connect your camera back onto WiFi through your computer.

If done correctly, passwords for both of these will be reset without problem.

How do I set up a mobile password for my ECO Series DVR?

To set up a mobile password for your ECO Series DVR, follow these steps:

  1. Find the user manual for your DVR to get started. Once you find it, locate the default password. If your DVR does have a device ID, the mobile password will be equal to the DVR’s default password.
  2. If there isn’t a device ID, setting up a password manually is an option. Keep in mind that some models may require a separate password for smartphones and tablets.
  3. Connect your DVR/NVR to a monitor to access your system.
  4. Go to Live View and right-click on it so that you can access the Quick Menu.
  5. Look for the Main Menu icon () and click on it.
  6. Once in Main Menu head over to Network settings then select Mobile.
  7. You’ll be prompted to enter a Username and Password of your choice for mobile access.
  8. For now, leave the Server Port with its default setting which is normally 1025 unless you need to use a different port.
  9. Apply these changes so they’re saved.
  10. Finally, click on exit so that you can return to Live View.

By following these steps you’ll be able to setup a mobile password for your ECO Series DVR successfully.

How can I modify user permissions on the ECO Series DVR?

To modify user permissions on the ECO Series DVR and adjust what features and channels each user can access, follow these steps:

  1. First, open the DVR interface.
  2. When open, right-click anywhere on the screen to display a menu.
  3. Search for the Main Menu icon and click it.
  4. Once you’re there, look for the System settings option and click that too.
  5. You should see a list of options in this section. Find Users and give that a click as well.
  6. The User tab should be open now, where you can make changes to different accounts. Choose which one you want to start with.
  7. Once you have an account selected, search for Permissions and click it.
  8. In this section you’ll find another list of toggles that let you change what people can do on the DVR.
  9. On top of that, you can even specify which channels they’re allowed to view within those permissions.
  10. After making all your changes, check around for an Apply button to save everything.
  11. Lastly, find an Exit option close out both Permission windows.

By following these steps you should be able to modify multiple user’s access levels on your ECO Series DVR with ease.

What are the default username and password for Lorex IP cameras?

The default username and password for most Lorex IP cameras are:

Username: admin
Password: admin

Keep in mind that this is subject to change. Newer cameras with updated features might ask you to create a new login on your first try. So if these don’t work, you’ll have to check the user manual or the camera’s box.

That being said, here’s what you need to do next:

How can I create a new user on the ECO Series DVR?

To make a new user in the ECO-Series DVR, you’ll need to follow these steps:

  1. Begin by right-clicking on the Live View so you can access the Quick Menu.
  2. Find and click on the Main Menu icon — this is normally a bunch of horizontal lines on top of each other.
  3. Another window will pop up, in that click on “System”.
  4. You’ll see several tabs at the top of this new window, go to “Users” and click it.
  5. Within the User tab, there should be a list of accounts. Select one and configure it to be your new user account.
  6. After selecting the account, there’s an “Edit” button at the bottom left corner of this window. Click it.
  7. In this next screen you will see 4 fields:
      – User Name: Here you have to put in a unique name for this account.
      – Password Enable: Slide or check this to enable a password.
      – Password: This one is self-explanatory, enter a password for this account.
      – Confirm: Re-enter the password just like before so we know for sure it’s accurate
  8. At the bottom right corner of this screen you’ll see an “Apply” button that creates your new user after being clicked.

By completing these steps you should now have successfully created a new user account on your ECO Series DVR.

How can I update the password for my IP cameras on my NVR?

To update the password for your IP cameras on your NVR, you can do the following:

  1. Start by power cycling your IP camera. First turn it off, then unplug it and wait for 5 minutes. After that, plug it back in and turn it on.
  2. Right-click on the Live View of your NVR to access the Quick Menu. You should see an option labeled “Device Search”, go ahead and click that.
  3. To keep going you need to log into your NVR using your login info. If you don’t know what that is, check your user manual.
  4. Once logged in, go back to the Remote Device window and click “Device Search” again. When you do this something will happen (hopefully). All of the IP cameras connected to the Local Area Network or NVR will display.
  5. Now all you have to do is pick which one you want to change the password for and click the Modify icon (usually looks like a pencil).
  6. A prompt will pop up asking for what you want to set as the new password for that camera. Go ahead and type in what you want and hit okay so it saves.

Just by doing those 6 steps, you’ll be able to successfully update the password for your IP camera on your NVR

How can I change my recorder’s password from the system using the New Local UI?

If you want to change your password from your system using the New Local UI, then check these steps out:

  1. Start by logging into your recorder using the system username, which is usually set as “admin,” and your current password.
  2. Right-click on the live view display to open up the Quick Menu and select “Main Menu”.
  3. In the Main Menu, click on “Users” and go to the User tab in the side area.
  4. Look for the admin username and click on the pencil icon next to it. This will let you use Edit mode.
  5. In Edit mode, you’ll be able to adjust certain settings. First thing’s first, make sure that Username is set to “admin.”
  6. Find “Modify Password” and click it to give yourself permission to get a new one.
  7. A message will pop up asking for your current password in the Old Password field.
  8. Type a new password of your choice into New Password field that also meets all of these requirements:
  • At least 8 characters
  • Have two of these four character types: lowercase letters, uppercase letters, numbers, special characters
  1. Confirm this new password by retyping it in the Confirm Password field.
  2. Once you’re done with all of that, save by pressing OK.
  3. Good job! You have now changed your recorder’s password successfully using our New Local UI, now just log in with it whenever you need to access it again

FAQs About Lorex NVR Factory Reset Without Password

  1. Is it possible to reset a Lorex NVR without a password? Yes, there are different ways to reset a Lorex NVR without a password.
  2. Will resetting my Lorex NVR without a password delete all my recordings? Yes, resetting your Lorex NVR will delete all your recordings and settings.
  3. Can I reset my Lorex NVR remotely? No, you need physical access to your NVR to reset it.
  4. How do I back up my recordings and settings before resetting my Lorex NVR? You can back up your recordings and settings by exporting them to a USB drive or an external hard drive.
  5. Can I reset my Lorex NVR if it’s not working properly? Yes, resetting your Lorex NVR can fix some issues with the system.

Conclusion

Resetting your Lorex NVR without a password is easy and can be done in different ways. Whether you’re using the reset button, the local interface, the Lorex Cloud Client, or the command prompt, make sure to follow the instructions carefully and take the necessary precautions. By resetting your Lorex NVR, you can ensure the security and performance of your surveillance system.

TwitterPost on X
X (Twitter)