Reset Blink Camera in a Jiffy: Step-by-Step Guide for Hassle-free Security

Have you ever experienced a glitch or technical difficulty with your Blink camera? Maybe you’ve noticed that your camera has stopped working properly, or perhaps you’ve encountered an error message that you’re not sure how to fix. Whatever the issue, resetting your Blink camera could be the solution you need. Like rebooting your computer or phone, resetting your Blink camera can clear up any software bugs or glitches that are causing issues.

But how exactly do you reset your camera, and when should you do it? In this blog post, we’ll walk you through the steps for resetting your Blink camera and provide tips for when to do so. So, let’s dive in and get your camera back up and running smoothly!

Step One: Unplug Your Camera

If you’re trying to reset your Blink camera, the first step is to unplug it. This might seem like an obvious step, but it’s important to make sure the camera is completely disconnected from power before proceeding. Once you’ve unplugged the camera, wait a few seconds before plugging it back in.

This will give the camera enough time to fully power off and reset. After plugging it back in, you can then proceed with the next steps for resetting your Blink camera. Remember to take the time to follow the instructions carefully and double-check everything before proceeding to ensure a successful reset.

By following these simple steps, you can reset your Blink camera and keep it running smoothly.

Locate the power source and disconnect it from your camera

If you’re looking to disconnect your camera, one of the first steps is to locate the power source and unplug it. This will ensure that your camera is completely turned off and will prevent any electrical accidents from happening while you’re working. Depending on the device, the power source may be a battery or a cord that’s plugged into an outlet.

For corded cameras, simply follow the power cord from the camera to the nearest outlet and unplug it. If you’re using a battery-powered camera, locate the battery compartment and remove the batteries. Once you’ve disconnected the power source, you can then move on to other steps in the process, such as cleaning or repairing your camera.

Remember to take your time and be careful when disconnecting the power source to avoid any unnecessary damage to your camera.

reset blink camera

Step Two: Press and Hold the Button

Once you have located the reset button on your Blink camera, the next step is to press and hold it for at least 10 seconds. This action will reset your camera to its factory default settings. You may need to use a small tool, like a paperclip, to press and hold the button, as it can be quite small.

While holding the button, you may notice that the LED light on your camera begins to flash. This is an indicator that the reset process has begun. It’s important to keep pressing and holding the button until the flashing stops and the LED light turns solid blue.

Once this happens, you can release the button and your Blink camera will be reset and ready to use again. Remember that this process will erase any saved settings or data, so you will need to set up your camera again before use.

Locate the reset button and firmly press and hold it for 10-15 seconds

To reset a device, the second step is to press and hold the reset button firmly for 10-15 seconds. To locate the reset button, check the device’s manual or look for a small, recessed button on the device’s surface. Once you’ve found it, use a thin pin or a paperclip to press and hold the button firmly for the specified period.

This action will clear any saved data and restore the device to its default settings. It’s important to hold the button down for the full 10-15 seconds, as a brief press may not be enough to reset the device effectively. Keep in mind that resetting your device will delete all your data, so make sure to back up any essential information before you begin.

With this simple step, you can quickly and easily reset your device and start fresh.

Step Three: Wait for the LED Light

Once you have completed the previous steps in resetting your Blink camera, the next thing to do is wait for the LED light. This light will indicate that your camera is ready to be set up again. It typically takes about a minute for the light to turn solid blue, which means the camera is ready to connect to your smartphone or other device.

It can be tempting to skip this step and move on to the next one, but it’s essential to wait for the LED light as it ensures that your camera is fully reset and ready to be set up as a new device. So, take a deep breath and be patient – the LED light will signify that you’re on the right track to getting your Blink camera up and running again.

Once the LED light starts flashing, release the button and wait for the camera to reboot

If you’re already excited about your new camera and can’t wait to get snapping, you’ll need to follow the instructions carefully to avoid any mishaps. Step three in particular requires patience, as it involves waiting for the LED light to start flashing before releasing the button and allowing the camera to reboot. This process can take a few seconds, but don’t be tempted to restart the camera or intervene in any way.

The LED light is an important indicator that the camera is initializing the settings and getting ready for use. Think of it like waiting for a traffic light to turn green – you need to stay alert and focused, but also allow the process to unfold naturally. Once the LED light starts flashing, you can release the button and start exploring all the amazing features your camera has to offer.

With a little bit of patience and attention, you’ll soon be taking stunning photographs and capturing memories that will last a lifetime.

Step Four: Reconnect Your Camera

Once you have completed the third step of resetting your Blink camera, it’s time to move onto the fourth step of reconnecting the camera. To do this, you will need to launch the Blink app on your smartphone and select the option to add a new device. Then, you will need to follow the instructions on the screen and input the necessary information, such as the name and location of your camera.

Once you have done this, you should be able to view the live feed of your camera right from your smartphone. It’s important to note that during this process, you may be prompted to enter your Wi-Fi network’s password, so make sure you have that information handy. Overall, reconnecting your Blink camera after resetting it is a quick and simple process that should only take a few minutes to complete.

Plug the power source back in and wait for the camera to fully restart

Reconnecting your camera is the final step to resolving any camera issues you may be experiencing. Once you have gone through the diagnostic process and determined that the problem is not with the camera itself, it’s time to plug the power source back in and wait for the camera to fully restart. This step will ensure that any firmware updates or settings changes have been saved.

Once the camera has restarted, it’s important to double-check that all cables are securely fastened and that any SD cards or memory sticks have been properly inserted. It’s also a good idea to test the camera’s various functions to ensure that everything is working as it should be. Remember, if you encounter any further problems, don’t hesitate to reach out to your camera manufacturer for assistance.

Following these simple steps will ensure that your camera is up and running in no time.

Additional Troubleshooting Tips

If you’re encountering issues with your Blink camera and resetting it seems like the best solution, we’ve got you covered with some additional troubleshooting tips. Firstly, ensure that your Blink camera is placed within range of the sync module and that there is no interference between the two. Additionally, try moving the camera closer to the sync module to see if that improves the connection.

If resetting the camera doesn’t work, try resetting the sync module instead by unplugging it for a few seconds and plugging it back in. It’s important to note that resetting your Blink camera will delete any recorded clips and alerts, so be sure to download anything you need before doing so. With these tips in mind, you should be able to get your Blink camera up and running smoothly in no time.

If the reset doesn’t work, try pressing the button for a longer period or contact Blink customer support

If you ever encounter an issue with your Blink camera system, sometimes resetting it might not solve the problem. In this case, try pressing the reset button for a longer period or contacting Blink customer support. They have experienced technicians who can help diagnose and resolve the issue you are facing with your Blink cameras.

You might be asked to provide details about the problem, so be sure to describe the issue as specifically as possible. When it comes to technical issues, it’s always best to have expert assistance so that your camera system will work flawlessly. Don’t hesitate to reach out to Blink’s customer support to get the help you need.

Common issues may also be resolved by updating the camera software or checking your Wi-Fi connection.

When it comes to troubleshooting common issues with security cameras, there are a few additional tips that could help you before calling a professional. One of the most effective solutions is to update the camera software. Your camera may not be functioning correctly due to outdated software, and updating it will solve the problem.

Additionally, checking your Wi-Fi connection is crucial, as a poor connection could cause slow or erratic camera performance. Moreover, avoid placing your camera near objects that can interfere with the Wi-Fi signal, such as metal objects or thick walls. Finally, regular maintenance and cleaning of your camera may help prevent common issues caused by dust or debris accumulation.

By following these additional troubleshooting tips, you could save yourself time and money and have a reliable security camera system that meets your needs.


In conclusion, resetting a Blink camera is like hitting the reset button on a bad day. It’s a chance to start fresh, clear your mind, and regain your bearings. Just like a Blink camera that may need a restart to function properly, sometimes we all need a little reset in our lives to get back on track.

So while it might seem like a small task, don’t underestimate the power of a reset; it could be just what you need to blink away the troubles of the day.”


How do I reset my Blink camera?
To reset your Blink camera, press and hold the reset button on the back of the camera for 20-30 seconds until the blue light on the camera turns off and then back on again.

Why do I need to reset my Blink camera?
You may need to reset your Blink camera if you are experiencing issues with connecting to the Blink app, if the camera is not responding, or if there are any other technical issues.

How do I know if my Blink camera has been successfully reset?
After resetting your Blink camera, the blue light on the camera will turn off and then back on again. You will also need to reconnect the camera to your Blink app using the camera’s serial number.

What happens to my Blink camera’s settings after I reset it?
Resetting your Blink camera will erase all custom settings and preferences that you have set on the camera, including motion detection zones and recording settings, so you will need to set these up again after resetting the camera.

What should I do if resetting my Blink camera does not solve the issue?
If resetting your Blink camera does not solve the issue, you may need to contact Blink customer support for further assistance. They may be able to provide more specific troubleshooting steps or offer a replacement camera if necessary.